MF-B180VS

 

 Price
Blog

  Feature

 

   
1

10” X 50” Table
2

5HP Variable speed, NST#40 Spindle
3

Spindle material SCM415 full hardened & ground
4

Quill dia. 4.13”, material S45C(SAE1045) with Frequency heat treatment & chrome plated, precision ground
5 XY Z axes double nut ACME lead screw
 

Saddle width 650mm (25.6”)
6

Rigid box ways on cross & column
7 Turcite-B On XYZ axes and Gibs
8

Hardened & Ground X&Y&Z Slideways & table
9

Counter-balancing weight device for milling head
10

Licensed Meehanite casting with anneal & stress

relieving treatment
11

Leveling Screw & Plate On Base
12

Rubber chip cover (front & rear )
13 Tool box & Tools
14

Coolant System & coolant tray
15

Quartz work light & Auto lubrication
16

Hardware Limited switch for Z axis
17

Lifting motor for Z travel

18

Electric Box & Control Panel

19

High Column Design to provide extra travel on Z*
20 Handle wheel on XYZ
21 Machine made in Taiwan complete

 

                                      

                                                                                 

 

  Specification

 

 
      TABLE  
　　Table  size 10” x 50” (250 x 1270mm)
　　T slot of spindle ( Qty  X  Size ) 3 x 0.63" (3 X 16 mm)
       Longitudinal travel 31” (776mm)
       Cross travel  21.2” (540mm)
       Vertical Travel 20” (500mm)
       Spindle to table nose (D) 3.0”-22.6”
     SPINDLE  
       Spindle taper NST#40
　　Spindle speed (RPM) - Variable speed head 60 Hz LOW : 60 ~ 500 HIGH : 500 ~ 4500
　　Stroke of quill: 5”  ( 127 mm)
　　Quill feeds rate (mm/rpm) 0.0015" ~ 0. 003" ~ 0.006"
　　Swiveling angle and Head swivel (R & L)  +45º
　　Spindle center to column front surface(E): 18.3”(565mm)
       Rapid traverse X,Y,Z axes(per min.): Manual (option)
      MOTOR  
　　Spindle motor  5 HP
       Drive on XY: Manual
       Drive on Z: ½ HP lifting motor
       Coolant Pump: 1/8 HP
     MACHINE SIZE  
　　Overall height  94” (2400mm)
　　Overall depth 71” (1800mm)
　　Overall width 63” (1600mm)
　　Net weight

4400 lbs. (2000 Kgs)

 

 

 

 

  Standard Accessory
      Lifting motor for Z axis installed
      Electric Control box & panel
      Hardware Limited switch for Z axis
      Coolant System & coolant tray
      Quartz work light & Auto lubrication pump
      Rubber chip cover( front & rear )
      Tool Box with Tools
    

Optional Accessory
      EVS head, 5HP inverter motor with Yaskawa driver 60-5000rpm
      Table guarding
      Digital readout
      Air power drawbar
      Column splash guarding(2pcs)
      6” Angle-fixed milling vise with swivel base
      Clamping kit (52 pcs)
    
     
 
 

All Specifications And Designs Are Subject To Change Without Notice.