MF-B185VS-SP

 

 Price
Blog

  Feature

 

   
1

12” X 50” Tablesp-150vs(Option with 12”x58” table)
2

5HP Variable speed, NST#40 Spindle
3

Spindle material SCM415 full hardened & ground
4

Quill dia. 4.13”, material S45C(SAE1045) with heat treatment, chrome plated and precision ground

 
5

Heavy duty wide saddle 40” (1016mm) support
6

Rigid box ways on cross & column
7 Turcite-B On XYZ axes and Gibs
8

Hardened & Ground X&Y&Z Slideways & table
9

XY precision ground double nut & preload

ballscrews

 
10

Handle wheel on XYZ
11

XY auto feed by variable speed AC Servo system,

Z by lifting motor.

 
12

Licensed Meehanite casting with anneal & stress relieving treatment

 
13

Leveling Screw & Plate On Base
14 Rubber chip cover (front & rear )
15

Telescopic steel chip cover (front)
16

Coolant System & coolant tray
17

Quartz work light & Auto lubrication
18

Column splash guard ( 2 pcs )
19

Hardware Limited switch for 3 axes

20 Tool box & Tools
21 Machine made in Taiwan complete
   

 

                                      

                                                                                 

 

  Specification

 

 
      TABLE  
　　Table  size 12” x 50” (305 x 1270mm)
　　T slot of spindle ( Qty  X  Size ) 3" x 0.629" ( 3 X 16 mm)
       Longitudinal travel ( W/O Power Feed )( Manual) 33” (840mm)
       Cross travel  19.6” (500mm)
       Vertical Travel 17.7” (450mm)
       Spindle to table nose (D) 1.7”-19.4”(45-495mm)
     SPINDLE  
　　Spindle taper NST#40
       Spindle speed (RPM) - Variable speed head 60 Hz LOW : 60 ~ 500 HIGH : 500 ~ 4300
　　Stroke of quill: 5”  ( 127 mm)
　　Quill feeds rate (mm/rpm) 0.0015" ~ 0. 003" ~ 0.006"
　　Swiveling angle and Head swivel (R & L)  +45º
　　Spindle center to column front surface(E): 18.3”(565mm)
       XYZ axes feed rates (per min.): 1-47 inch/min.
       Rapid traverse X,Y axes(per min.): 141 inch/min.
       Rapid traverse Z axis(per min.): 35.4 inch/min
     MOTOR  
　　Spindle motor  5 HP
       Drive on XY: 1HP AC Servo motor
       Drive on Z: ½ HP lifting motor
       Coolant Pump: 1/8 HP
      MACHINE SIZE  
　　Overall height  95” (2400mm)
　　Overall depth 88” (2230mm)
　　Overall width 69” (1750mm)
　　Net weight

5040 lbs. (2250 Kgs)

 

 

 

  Standard Accessory
      XY auto feed by variable speed AC Servo system      Hardware limited switch for 3 axes
      Z axis lifting motor      Coolant system & Coolant Tray
      XY axes ball screws      Column splash guard(2pcs)
      Lifting motors installed      Auto lubrication
      Telescopic steel chip cover (front)      Quartz work light
      Rubber chip cover( front & rear )      Tool Box with Tools
     
    

Optional Accessory
      EVS Head, 5HP inverter motor with Yaskawa Driver 60-5000rpm
      12” x 58” Table to provide 41” X travel
      Table Guarding
      Digital readout
      Power drawbar
      Dial micrometer for quill stroke
      CE electrical box (surcharge)
      6” Angle-fixed milling vise with swivel base
      Clamping kit (52 pcs)
 

 

 

 

All Specifications And Designs Are Subject To Change Without Notice.