• 17.72 X 70.87 Tablesp-150vs with long saddle to provide rigidity

  • 10HP Spindle Inverter Motor, NST#40 Spindle, 220V/3/60Hz standard

  • Yaskawa driver for frequency Inverter system

  • Spindle material SCM415 full hardened & ground

  • Quill dia. 4.13, material S45C(SAE1045) with Frequency heat treatment & chrome plated, precision ground

  • Turcite-B On XYZ axes and gibs

  • Hardened & Ground on X&Y&Z Slideways & table

  • Rigid box ways on cross & column

  • XYZ precision ground double nut & preload ballscrews

  • Handle wheel on XY.

  • Licensed Meehanite casting with anneal & stress relieving treatment

  • Leveling Screw & Plate On Base.

  • Tool box & Tools

  • Telescopic steel cover on front

  • Rubber chip cover ( column & rear )

  • Coolant System & coolant tray

  • Quartz work light & Auto lubrication

  • Column splash guard ( 2 pcs )






                   Note: picture shows machine with Anilam 3300 control.  

                              Other controls are also available.  






  Table  size 17.72 x 70.87 (450 x 1800mm)
       Longitudinal travel 51.2 (1300mm)
       Cross travel  23.6 (600mm)
       Vertical travel 28 (700mm)
       Spindle to table nose (D) 5.9-33.5(150-850mm)
  Spindle taper NST#40
    Spindle speed (RPM) 8000 inverter system
  Stroke of quill 5 (127mm)
  Quill feeds  (mm/rpm) 0.0015 - 0.003 - 0.006
  Swiveling angel and Head swivel (R & L)  +45
  Spindle center to column (E) 22.8(580mm)
       XYZ axes feed rate (per min) 0-29.5 inch/min(depends on CNC system)
       Rapid traverse X,Y,Z axes(per min) 472.41 inch/min(depends on CNC system)
      Spindle motor  10HP inverter motor
      Drive on XYZ:          1HP(depends on CNC system)
    Coolant pump: 1/4HP
  Overall length  110 (2750mm)
  Overall width 95.9 (2435mm)
  Overall height 115.4 (2930mm)
  Net weight

8712 lbs. (3960 Kgs)




  Standard Accessory

      EVS head, 5HP inverter motor with Yaskawa driver Hardware limited switch for 3 axes
      XYZ precision ground ballscrews Column splash guard ( 2 pcs )
      Handwheel on XYZ Coolant system & coolant tray
      Telescopic steel chip cover ( front ) Quartz work light & auto lubrication
      Rubber chip cover( front & rear ) Tool box with tools
  CNC Control System

Optional Accessory

      15 x 58 Table
      Table guarding
      Transformer for 380V power to 220V/110V for inverter & CNC
      Digital readout system
      Air power drawbar
      6 Angle-fixed milling vise with swivel base
      Clamping kit (52 pcs)

All Specifications And Designs Are Subject To Change Without Notice.