SP-150VS

 

 Price
Blog

  Feature

 

 

 
1 9” X 49” Table, Hardened & Ground Table with Ground T-Slot
2 3HP Spindle Motor, variable speed
3 R8 (NST#30) Spindle Material Scm415(SAE4115)Hardened & Ground.
4 Bearing support to the motor shaft
5 Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support
6 Turcite-B On X&Y Ways, Slide-ways and Gibs.
7 Hardened & Ground X&Y Slide-ways
8 Electroless Nickel-Phosphorus Process On X&Y lead-screw with hardness 35 HRC.
9 Lead-screw nut made from PBC2, phosphor bronze
10 Highly Improved Vari-Speed Head.
11 1-1/4”(32mm) Diameter Lifting Screw.
12 Leveling Screw & Plate On Base.
13 Strict Requited Scraping with High Precise Accuracy.
14 Tool box & Tools
15 Rubber chip cover (front & rear )
16. 2 years parts warranty

 

               

                                                                                               

  Specification

 

 
      TABLE  
　　Table  size 9” x 49” (230 x 1245mm)
　　T slot of spindle ( Qty  X  Size ) 3 x 0.629" ( 3 X 16 mm)
       Longitudinal travel (with power feed ) 33.7" (850 mm)
                                  (w/o power feed) 36” (930mm)
       Cross travel  12” (305mm)
       Quill travel  5” (127mm)
       Spindel to table nose (D) 1-3/8” - 17-3/8” (34-440mm)
      SPINDLE  
　　Spindle taper R8 (or NST # 30)
　　Spindle speed (RPM) - Variable speed head 50 Hz LOW : 50 ~ 420 HIGH : 420 - 3900
60 Hz LOW : 60 ~ 500 HIGH : 500 ~ 4500
　　Quill travel 5”  (127 mm)
　　Ram travel 14” (356mm)
　　Over swivel on turret 360º
　　Quill feeds  (mm/rpm) 0.0015" ~ 0. 003" ~ 0.006"
　　Head swivel (R & L) 90º
　　Head tilt (up & down) 45º
　　Spindle to column (E) 6”-21” (153-544mm)
      MOTOR  
　　Spindle motor  3 HP
      MACHINE SIZE  
　　Overall height  84” (2140mm)
　　Overall depth 63.6” (1618mm)
　　Overall width 65.7” (1670mm)
　　Net weight

2200 lbs. (950 Kgs)

 

 

 

  Standard Accessory
       Rubber chip cover( front & rear )
       Tool Box with Tools

Optional Accessory
      EVS head, 3HP inverter motor with Yaskawa driver 60-5000rpm
      Align AL-500 power feed for X
      Servo model 150 power feed X
      Servo model 150 power feed Y
      Align AL-500 power feed for Y OR Z
      Servo power feed (Z axis) model 140
      Servo turbo power feed on any axis
      Digital readout
      Auto lubrication pump
      Coolant system (1/8 HP,3PH,220V )
      Coolant tray (Base)
      Quartz work light
      Riser block 4"/6"/8"
      R8 collet set (7pcs/set)
      6” Angle-fixed milling vise with swivel base
      Clamping kit (52 pcs)
 

All Specifications And Designs Are Subject To Change Without Notice.