SP-460VS

 

Price
Blog

  Feature

 

   

1 10" 54" Table 
2 3HP Spindle motor
3 R8 (NST#30)Spindle Material SCM415(Sab4115 ) Hardened & Ground
4 Bearing support to the motor shaft
5 Licensed Meehanite Casting
6 Unique rigid design on spindle auto-speed
7 Turcite-B on X&Y ways, Slideways And Gibs.
8 Hardened & Ground X&Y Slideways
9 Hardened & Ground Table with ground T-slots.
10 Electroless Nickel-Phosphous process on X&Y lead screws with hardness 35HRC
11 Leadscrew nut made from PBC2,phosphor bronze
12 Highly improved Vari-speed head
13 1-1/2' ( 38mm )Diameter lifting screw
14 Leveling screws & pads on base
15 Machine made in Taiwan complete
   

 

               

                                                                                               

  Specification

 

 

      TABLE  
  Table  size 10" x 54"( 250 X 1370 mm)
  T slot of spindle ( Qty  X  Size ) 3 x 0.629" ( 3 X 16 mm)
       Longitudinal travel ( X axis ) ( Manual ) 34" ( 870 mm
       Longitudinal travel (Y Axis)  ( Auto ) 30.5" ( 775 mm)
       Cross travel  15-3/8" ( 390 mm)
       Quill travel  15-3/8" ( 390 mm)
       Spindel to table nose (D) 4" ~ 20 (100 ~ 506 mm)
      SPINDLE  
  Spindle taper R8 (or NST # 30)
  Spindle speed (RPM) - Step head 50 Hz LOW : 66 ~ 270 HIGH : 550 - 2270
60 Hz LOW : 80 ~ 235  HIGH : 660 ~ 2720
  Spindle speed (RPM) - Variable speed head 50 Hz LOW : 50 ~ 420 HIGH : 420 - 3900
60 Hz LOW : 60 ~ 500 HIGH : 500 ~ 4500
  Quill travel 5  ( 127 mm)
  Ram travel 22 ( 560 mm)
  Over swivel on turret 360
  Quill feeds  (mm/rpm) 0.0015" ~ 0. 003" ~ 0.006"
  Head swivel (R & L) + - 4 5
  Head tilt (up & down) + - 4 5
  Spindle to column (E) 6.25"-28.3" (159 ~ 719 mm)
      MOTOR  
  Spindle motor  3 HP
      MACHINE  
  Overall height  87 ( 2211 mm)
  Overall depth 82 ( 2087 mm)
  Overall width 72.4 ( 1840 mm)
  Net weight

3000 lbs. (1300 Kgs)

 

 

 

  Standard Accessory

       Rubber chip cover( front & rear )
       Tool Box with Tools

Optional Accessory

      EVS Head, 3hp inveter motor with Yaskawa Driver 60-5000rpm
      Align AL-500 Power feed for X:
      Servo model 150 Power Feed X:
      Servo model 150 Power Feed Y:
      Align AL-500 Power feed for Y OR Z:
      Servo power feed (Z axis) Model 140
      Servo Turbo power feed on any axis
      Coolant system (1/8 HP,3PH,220V )
      Coolant tray (Base)
      Quartz work light:
      6 Angle-fixed milling vise with swivel base:
      Clamping kit (52 pcs):
 

All Specifications And Designs Are Subject To Change Without Notice.