V-200VS

 

 Price
Blog

  Feature

 

   
1 11" × 52" Table , long saddle & box way on Y
2 5HP Variable Speed Head by Inverter Motor, Hi-Lo speed change by Gear Transmission( without timing belt)
3 NST#40 Spindle Material Scm415(SAE4115)Hardened & Ground.
4 Spindle bearing appliance with 7210(P4) Angular contact bearings.
5 Meehanite casting GC275 with annealing & stress relieving treatment.
6 Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support
7 Ram is moveable directly on extra heavy duty column without turrent
8 XY axes use C5 pre-load double nut ball screws, no backlash and provide accurate positioning.
9 Hardened & Ground XYZ Slideways and T-slot of table
10 Turcite-B On X&Y Ways, Slideways and Gibs.
11 1-1/2”(38mm) Diameter Lifting Screw.
12 Leveling Screw & Plate On Base.
13 Lifting motor installed
14 Electrical Box and control Panel
15 Rubber chip cover (front & rear )
16 Tool box & Tools
17 Machine made in Taiwan complete
   
.  
   

 

                        

                                                                               

 

  Specification

 

 
      TABLE  
　　Table  size 11” x 52” (280 x 1320mm)
　　T slot of spindle ( Qty  X  Size ) 3 x 0.629" ( 3 X 16 mm)
       Longitudinal travel ( W/O Power Feed ) 36-7/32” (920mm)
                                  ( with Power Feed) 33" ( 840 mm)
       Cross travel  15” (380mm)
       Travel of knee 16” (406mm)
       Quill travel  5-33/64” (140mm)
       Spindle to table nose (D) 2.3”~18.3” (60~466mm)
      SPINDLE  
　　Spindle taper NST#40
       Spindle speed (RPM) - Variable speed head 50~3600
　　Quill travel 5-33/64”  ( 140 mm)
　　Ram travel 18-7/8” ( 485 mm)
　　Over swivel on turret NIL
　　Quill feeds  (mm/rpm) 0.0013" ~ 0.0027" ~ 0.0055"
　　Head swivel (R & L)  +45º
　　Head tilt (up & down) Option
　　Spindle to column (E) 7.5”~26.5” (190~675mm)
     MOTOR  
　　Spindle motor  5 HP inverter
     MACHINE SIZE  
　　Overall height  93.11” (2365mm)
　　Overall depth 81.9” (2080mm)
　　Overall width 68.88” (1775mm)
　　Net weight

3740 lbs. (1700 Kgs)

 

 

 

  Standard Accessory
      Electrical Box and control Panel
      Lifting motor
      Rubber chip cover( front & rear )
      Tool Box with Tools

Optional Accessory
      Align AL-500 Power feed for X
      Servo model 150 Power Feed X
      Servo model 150 Power Feed Y
      Align AL-500 Power feed for Y OR Z
      Servo power feed (Z axis) Model 140
      Servo Turbo power feed on any axis
      Digital Readout System
      Air Power Drawbar
      Auto Lubrication Pump
      Coolant system (1/8 HP,3PH,220V )
      Coolant tray (Base)
      Quartz work light
      6” Angle-fixed milling vise with swivel base
      Clamping kit (52 pcs)
 
     

All Specifications And Designs Are Subject To Change Without Notice.