VL-1000

 

 Price
Blog

  Features

 

   
1 BT40 / CAT40 / DIN40 spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
2 Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 RPM
3 Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
4 Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm
5 Special design Weight Balance leadscrew with needle bearings for better support and smooth movement
   

 

                        

                                                                               

 

  Specification

 

 
      TRAVEL  
　　X/Y/Z travel 40.2" / 20" / 22"
　　Spindle nose to table surfacce 5.9" ~ 28"
　　Spindle center to column surface 24.2"
      TABLE  
       Table  size 47.2" x 19.7"
       T-Slot (Size / Qty / Dist.) 0.7" x 5 x 3.9"
       Max. table load (Kgs) 1102 Lbs
      SPINDLE  
　　Speed 8,000 RPM(10,000 ~ 15,000 RPM)
　　Taper BT40 / DIN40 / CAT40
　　Transmission Belt
      FEED RATE  
　　Rapid feed rate of XYZ 1418 / 1418 / 1418 inch/min
　　Cutting feed rate 1 ~ 394 inch/min.
      AUTOMATIC TOOL CHANGER/b>  
　　Tool storage capacity Armless 16 (Armless 20 /  Arm 24)
       Max. tool diameter Full: 3.9"   Next empty: 5.9"
　　Max. tool length 11.8"
　　Max. tool weight 13.2 Lbs
      CNC CONTROL & MOTOR  
　　CNC control Mitsubishi(FANUC / SIEMENS / HEIDENHAIN / FAGOR)
　　Spindle motor 5.5 / 7.5 Kw (10 HP)
　　Axis motors 2 Kw
      COOLANT  
　　Coolant pump 0.75 HP
　　Coolant tank capacity 230 L
      AIR & POWER SUPPLY  
　　Air source  6 Kg / cm2
　　Power supply

15 KVA
      MACHINE SIZE  
　　Dimension  114.2" x 87" x 112.2"
　　Net weight ~ 11440 Lbs
　　Gross weight ~ 11880 Lbs

 

 

 

  Standard Accessory
      Rigid tapping
      RS-232 interface
      Auto power off
      Auto lubrication
      Halogen work light
      End of program light
      Heat exchanger for electrical cabinet
      Full guarding / Remote handwheel
      Leveling bolts and plate
      Tools and box
      Operation manual
      Spindle oil cooler 6000 BUT
      
     

Optional Accessory
      Spindle oil cooler
      High pressure water scour for chip removal
      Air conditioner for electrical box
      Coolant through spindel center
      Screw type chip conveyor
      Oil skimmer
      Chain type chip conveyor
      Oil through tool holder
      Scraper type chip conveyor
      Oil mist lubrication pump
      4th axis
      CE electrical box
      DRO
      Transformer
 
     

All Specifications And Designs Are Subject To Change Without Notice.