VL-1200

 

Price
Blog

  Features

 

   

1 BT-40 / CAT40 / DIN40 spindle (Φ120mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
2 Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
3 Hardened & Ground C3 Double-Nut ballscrews (Φ32mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
4 Positioning accuracy: 0.005mm / 300mm Repeating accuracy: 0.003mm / 300mm
5 2-way high precision linear guide ways are installed on each axis. Y&Z linear guide ways are 45 mm for better support and high precision movement.
   

 

                        

                                                                               

 

  Specification

 

 

      TRAVEL  
  X/Y/Z travel 47.2" / 24" / 24"
  Spindle nose to table surfacce 5.9" ~ 29.9"
  Spindle center to column surface 28.2"
      TABLE  
       Table  size 51.2" x 23.6"
       T-Slot (Size / Qty / Dist.) 0.7" x 5 x 3.9"
       Max. table load (Kgs) 2205 Lbs
      SPINDLE  
  Speed 8,000 RPM(10,000 ~ 15,000 RPM)
  Taper BT40 / DIN40 / CAT40
  Transmission Belt
      FEED RATE  
  Rapid feed rate of XYZ 1418 / 1418 / 1418 inch/min
  Cutting feed rate 1 ~ 394 inch/min.
      AUTOMATIC TOOL CHANGER/b>  
  Tool storage capacity Armless 20 (Arm 24 / Chain 32)
       Max. tool diameter Full: 3.9"   Next empty: 5.9"
  Max. tool length 11.8"
  Max. tool weight 13.2 Lbs
      CNC CONTROL & MOTOR  
  CNC control Mitsubishi(FANUC / SIEMENS / HEIDENHAIN / FAGOR)
  Spindle motor 7.5 / 11 Kw (15 HP)
  Axis motors 3 Kw
      COOLANT  
  Coolant pump 0.75 HP
  Coolant tank capacity 270 L
      AIR & POWER SUPPLY  
  Air source  6 Kg / cm2
  Power supply

20 KVA

      MACHINE SIZE  
  Dimension  135.8" x 110.4" x 113.8"
  Net weight ~ 13200 Lbs
  Gross weight ~ 13640 Lbs

 

 

 

  Standard Accessory

      Rigid tapping
      RS-232 interface
      Auto power off
      Auto lubrication
      Halogen work light
      End of program light
      Heat exchanger for electrical cabinet
      Full guarding / Remote handwheel
      Leveling bolts and plate
      Tools and box
      Operation manual
      Spindle oil cooler 6000 BUT
      
     

Optional Accessory

      Spindle oil cooler
      High pressure water scour for chip removal
      Air conditioner for electrical box
      Coolant through spindel center
      Screw type chip conveyor
      Oil skimmer
      Chain type chip conveyor
      Oil through tool holder
      Scraper type chip conveyor
      Oil mist lubrication pump
      4th axis
      CE electrical box
      DRO
      Transformer
 
     

All Specifications And Designs Are Subject To Change Without Notice.