VL-1300

 

 Price
Blog

  Features

 

   
1 The sufficient depth from spindle center to machine column not only accommodates 700mm Y axis travel but also enables easy access for large diameter facing milling cutter.
2 Full support Y axis with 4 roller linear guide ways.
3 Six Roller Shoes are employed on the machine column that firmly supports the headstock to perform heavy duty cutting.
4 45 mm Oversized Ball Screws, the VL1300 employs high precision fine ground ball screws for optimum motion control accuracy.
5 The double chip augers deliver chips out of machine during cutting, that prevent chips from depositing in the machine. Another benefit is to save time in chip removing by the operator.
   

 

                        

                     

 

  Specification

 

 
      TRAVEL  
　　X/Y/Z travel 51.2" / 27.6" / 27.6"
　　Spindle nose to table surfacce BT40 5.1" ~ 32.7"  BT50 3.9" ~ 31.5"
　　Spindle center to column surface 30.3"
      TABLE  
       Table  size 57.1" x 27.6"
       T-Slot (Size / Qty / Dist.) 0.7" x 5 x 4.9"
       Max. table load (Kgs) 2640 Lbs
      SPINDLE  
　　Speed 8,000 RPM(10,000 ~ 15,000 RPM)/6,000 RPM
　　Taper BT40 / BT50
　　Transmission Belt
      FEED RATE  
　　Rapid feed rate of XYZ 1181 / 1181 / 945 inch/min
　　Cutting feed rate 1 ~ 394 inch/min.
      AUTOMATIC TOOL CHANGER/b>  
　　Tool storage capacity Armless 20 (Arm 24 / Chain 32)
       Max. tool diameter Full: BT40/BT50 3.9"/4.9"   Next empty: BT40/BT50 5.9"/7.9"
　　Max. tool length 11.8"
　　Max. tool weight 13.2/33 Lbs
      CNC CONTROL & MOTOR  
　　CNC control Mitsubishi(FANUC / SIEMENS / HEIDENHAIN )
　　Spindle motor 7.5 / 11 Kw (15 HP)
　　Axis motors 3.5 Kw
      COOLANT  
　　Coolant pump 0.75 HP
　　Coolant tank capacity 380 L
      AIR & POWER SUPPLY  
　　Air source  6 Kg / cm2
　　Power supply

20 KVA
      MACHINE SIZE  
　　Dimension  143.7" x 114.8" x 120.1"
　　Net weight ~ 18370 Lbs
　　Gross weight ~ 18810 Lbs

 

 

 

  Standard Accessory
      Rigid tapping
      RS-232 interface
      Auto power off
      Auto lubrication
      Halogen work light
      End of program light
      Heat exchanger for electrical cabinet
      Full guarding / Remote handwheel
      Leveling bolts and plate
      Tools and box
      Operation manual
      Spindle oil cooler 6000 BUT
      
     

Optional Accessory
      Spindle oil cooler
      High pressure water scour for chip removal
      Air conditioner for electrical box
      Coolant through spindel center
      Screw type chip conveyor
      Oil skimmer
      Chain type chip conveyor
      Oil through tool holder
      Scraper type chip conveyor
      Oil mist lubrication pump
      4th axis
      CE electrical box
      DRO
      Transformer
 
     

All Specifications And Designs Are Subject To Change Without Notice.