Super Precision Knee type Milling Machine SP-150VS 9"x49"
• 9” X 49” Table, Hardened & Ground Table with Ground T-Slot • 3HP Spindle Motor, variable speed • R8 (NST#30) Spindle Material Scm415(SAE4115)Hardened & Ground. • Bearing support to the motor shaft • Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support • Turcite-B On X&Y Ways, Slide-ways and Gibs. • Hardened & Ground X&Y Slide-ways. • Electroless Nickel-Phosphorus Process On X&Y lead-screw with hardness 35 HRC. • Lead-screw nut made from PBC2, phosphor bronze • Highly Improved Vari-Speed Head. • 1-1/4”(32mm) Diameter Lifting Screw. • Leveling Screw & Plate On Base. • Strict Requited Scraping with High Precise Accuracy. • Tool box & Tools • Rubber chip cover (front & rear ) • Made in Taiwan • 2 years parts warranty
Specification:Table: 9” x 49” (230 x 1245mm)T-Slot No.x Size: 3” x 5/8” (3 x 15.875mm)Longitudinal travel (W/O power feed ): 37” (940mm) (With power feed ): 34”(863mm)Cross travel: 12” (305mm)Travel of knee: 16” (406mm)Ram travel: 14” (356mm)Quill travel: 5” (127mm)Table to spindle nose (D): 1-3/8” - 17-3/8” (34-440mm)Over swivel on turret: 360ºHead Swivel ( R & L ): 90ºHead tilt ( UP & DOWN ): 45ºSpindle to column (F): 6”-21” (153-544mm)Spindle motor: 3HPSpindle taper: R8 (or NST#30 )Quill feed: 0.0015” - 0.003” - 0.006” Spindle Speed (r.p.m.): ( 60Hz) 60-4500, ( 50Hz ) 50-3800Overall height (A): 84” (2140mm)Overall depth (B): 63-5/8” (1618mm)Overall width (C): 59” (1497mm)Net Weight: 2200 lbs. (950 Kgs)
Optional Accessory for milling machine:EVS Head, 3HP inverter motor with Driver 60-5000 rpm $ 1,800.00Align AL-500 Power feed for X: $ 700.00Servo model 150 Power Feed X (M-0200-150): $ 925.00Servo model 150 Power Feed Y (M-3550-150): $ 1175.00Align AL-500 Power feed for Y OR Z: $ 750.00Servo power feed (Z axis) Model 200 (M-3580-200): $ 1033.00Coolant system (1/8 HP,3PH,220V ) $ 400.00Coolant tray (Base) $ 300.00Riser block 4” /6”/8” $ 500/550/600.00Quartz work light: $ 160.00 6” Angle-fixed milling vise with swivel base: $ 360.00Clamping kit (54 pcs): $ 95.00R8 Right Angle Attachment complete set $ 880.0011 PC R8 Collet Set 1/8" to 3/4" $ 100.00NST#30 spindle extra $ 400.00Single Phase spindle motor (220V only) $ 300.00Auto Lube System $ 250.00
DRO System:Newall DP700 mill package, 3 Axis $ 2500.00Newall DP700 mill package, 2 Axis $ 1900.00Fitcom DRO system, 2 axis $ 800.00Mitutoyo Quill kit $ 560.00
Power Drawer bar:MAXI TORQUE-RITE power drawbar (R8 ) $ 800.00Taiwanese Automatic Power Drawbar $ 700.00 Proposal: SP-150VS machine 220V3HP R8 variable speed,9"x49" table $ 11,000.00 Newall DP700 mill package, 2 Axis $ 1,900.000 Align AL-500 Power feed for X: $ 700.00 Total: $13,600.-
DRO System:Newall DP700 mill package, 3 Axis $ 2500.00Newall DP700 mill package, 2 Axis $ 1900.00Fitcom DRO system, 2 axis $ 800.00Mitutoyo Quill kit $ 560.00
Power Drawer bar:MAXI TORQUE-RITE power drawbar (R8 ) $ 800.00Taiwanese Automatic Power Drawbar $ 700.00 Proposal: SP-150VS machine 220V3HP R8 variable speed,9"x49" table $ 11,000.00 Newall DP700 mill package, 2 Axis $ 1,900.000 Align AL-500 Power feed for X: $ 700.00 Total: $13,600.-
Super Precision Knee type Milling Machine SP-500VS 10"x54"
• 10”x54”” Table, long saddle & box way on Y • Hardened & Ground Table with Ground T-Slot • 3HP Spindle Inverter Motor, Electronic variable speed • R8 Spindle Material Scm415(SAE4115)Hardened & Ground. • Bearing support to the motor shaft • Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support • Turcite-B On X&Y Ways, Slideways and Gibs. • Hardened & Ground X&Y Slideways. • Electroless Nickel-Phosphorus Process On X&Y leadscrew with hardness 35 HRC. • Leadscrew nut made from PBC2, phosphor bronze • Highly Improved Variable Speed Head. • Rubber chip cover (front & rear ) • 1-1/2”(38mm) Diameter Lifting Screw. • Leveling Screw & Plate On Base. • Tool box & Tool • Rubber chip cover ( front & rear )
Specification:
Table: 10” x 54” (250 x 1370mm)
T-Slot No.x Size: 3” x 0.629” (3 x 16mm)
Longitudinal travel (W/O power feed ): 34” (870mm)
(With power feed ): 30.5” (775mm)
Cross travel: 16” (410mm)
Travel of knee: 17” (450mm)
Ram travel: 22” (562mm)
Quill travel: 5” (127mm)
Table to spindle nose (D): 3.3” — 21” (85-535mm)
Over swivel on turret: 360º
Head Swivel ( R & L ): +45º
Head tilt ( UP & DOWN ): 45º
Spindle to column (F): 6.6”-28.7” (168-730mm)
Spindle motor: 3HP inverter motor
Spindle taper: R8
Quill feed: 0.0015” - 0.003” - 0.006”
Spindle Speed (r.p.m.): ( 60Hz) 60-5000
Overall height (A): 90” (2262mm)Overall depth (B): 83.5” (2120mm)Overall width (C): 72.4” (1840mm)Net Weight: 3360 lbs. (1500 Kgs)
Optional Accessory for milling machine:Align AL-500 Power feed for X: $ 700.00Align AL-500 Power feed for Y OR Z: $ 750.00Coolant system (1/8 HP,3PH,220V ) $ 400.00Coolant tray (Base) $ 300.00Riser block 4” /6”/8” $ 500/550/600.00Quartz work light: $ 200.00 6” Angle-fixed milling vise with swivel base: $ 400.00Clamping kit (54 pcs): $ 100.00R8 Right Angle Attachment complete set $ 900.00
DRO System:Newall DP700 mill package, 3 Axis $ 2500.00Newall DP700 mill package, 2 Axis $ 1900.00Sino DRO system, 2 axis $ 1000.00Mitutoyo Quill kit $ 600.00Power Drawer bar:Taiwanese Power Drawbar $ 800.00
Proposal:SP-500VS machine 220V3HP R8 variable speed,10"x54" table $ 14,000.00Newall DP700 mill package, 3 Axis $ 2,500.000Align AL-500 Power feed for X: $ 700.00
Total: $17,200.-
Optional Accessory for milling machine:Align AL-500 Power feed for X: $ 700.00Align AL-500 Power feed for Y OR Z: $ 750.00Coolant system (1/8 HP,3PH,220V ) $ 400.00Coolant tray (Base) $ 300.00Riser block 4” /6”/8” $ 500/550/600.00Quartz work light: $ 200.00 6” Angle-fixed milling vise with swivel base: $ 400.00Clamping kit (54 pcs): $ 100.00R8 Right Angle Attachment complete set $ 900.00
DRO System:Newall DP700 mill package, 3 Axis $ 2500.00Newall DP700 mill package, 2 Axis $ 1900.00Sino DRO system, 2 axis $ 1000.00Mitutoyo Quill kit $ 600.00Power Drawer bar:Taiwanese Power Drawbar $ 800.00
Proposal:SP-500VS machine 220V3HP R8 variable speed,10"x54" table $ 14,000.00Newall DP700 mill package, 3 Axis $ 2,500.000Align AL-500 Power feed for X: $ 700.00
Total: $17,200.-
HORIZONTAL/VERTICAL TURRET MILLING MODEL: VH-250VS-SP
• 12 X 50” (12” x 58” optional)Table, long saddle, box way on Y & Z • 5HP Heavy duty Vertical head with variable speed 50-3600rpm, Hi-Low speed change by gear transmission (with no timing belt). • 7.5 HP Inverter driver • NST#40 Spindle, Quill Dia. 110mm. Spindle is made from SCM-415 (SAE4115) Cr-Mo Alloy steel, then heat treated and precision ground. • 5HP Horizontal Inverter motor with 48-240(Lo), 240-1180(Hi) spindle speed • Turcite-B coated on the XY slideways and gibs. • Hardened & Ground on the XYZ slideways and T-slot of table. • XY axes use C5 pre-load double nut ball screws, no backlash and provide accurate positioning. • Spindle bearing appliance with 7210(p4) Angular contact bearings. • 1-1/2”(38mm) Diameter Lifting Screw. • Leveling Screw & Plate On Base. • Meehanite casting GC275 with annealing & stress relieving treatment. • Auto-lubrication system • Ram is moveable directly on extra heavy duty column without turret. • All the slideways (column, table, saddle, ram and knee) are installed with rubber wiper. • Lifting motor and control panel with electric box • Direct construction on Ram & Column • AC Servo motor on X & Y with variable speed change, both offer high working efficiency • Electro-megnatic clutch on X & Y, protect work-piece or tools from damage
Specification:Table: 12”x 50” (350 x 1270mm) 12”x 58” (350 x 1473mm)T-Slot No.x Size: 3” x 5/8” (3 x 16 mm)Longitudinal travel (W/O power feed ): 35.4” (900mm) 50” table 43.4” (1100mm) 58” tableCross travel: 15.7” (400mm)Travel of knee: 17.7” (450mm)Ram travel: 23.6” (600mm)Ram feed rate (ipm) 45.2 (ipm) Auto feed rate XYZ axes (rpm) 0-1500Rapid feed rate XYZ axes -SP(Servo) 118 ipm
Quill travel: 5-1/2” (140mm)Table to spindle nose (D): 5.1”- 22.8” (130-580mm)Over swivel on turret: NoneHead Swivel ( R& L ): 45ºHead tilt ( UP& DOWN ): OptionSpindle to column (F): 7.3”-27” (185-685mm)Spindle motor: 5HP, Inverter Motor (7.5HP Inverter Driver)Spindle taper: NST#40 Quill feed: 0.0013” - 0.0027” - 0.0055”Spindle Speed (r.p.m.): ( 60Hz) 50-3600
Horizontal Spindle speed (rpm) 48-240 (Lo), 240-1180(Hi)Taper NST#40Spindle center to column front surface: 15.7" (400mm)Spindle nose to table surface: 0.78" - 18.5" (20-470mm)Spindle center to Ram bottom surface: 6.7" (170mm)
XY axes motor (HP): 0.8 Kw Servo motorLifting motor: 1 HPCoolant pump: 1/6 HP
Overall height (A): 100.4” (2550mm)Overall depth (B): 84.6” (2150mm)Overall width (C): 77.55” (1970mm)Net Weight: 5500 lbs. (2500Kgs) TURRET MILLING MACHINES MODEL SPINDLE HEAD TABLE SIZE USD $37,800 SPINDLE SPEED MOTOR VH-250VS-SP NST#40 VARIABLE SPEED 5HP/3PH 12"X50"
STANDARD ACCESSORIES Tools & box/Leveling bolts & plates/Drawbar (manual)/Auto-lubrication/ Coolant system/ Quartz work light/ motor/Dial indicator Simple spindle tapping device/ XY ballscrew/Electrical box/ Lifting Motor Remark: 1. Horizontal spindle: 5HP/Hi-Low gear box (inverter variable speed) 2. Standard with variable speed spindle motor 5HP/220V with Inverter 7.5HP/220V OPTIONAL ACCESSORIES ( EXTRA COST) SPECIFICATION USD.$ Base splash guard 300 Column splash guard (left & right) 800 Airpower drawbar NST#40 800 Wooden crate packing 200 CE/CSA electric box extra 1000 12" x 58" Table 800 TRANSFORMER NEEDED IF OTHER THAN 220V 10 KVA 1200 Newall DP-700 3-axis DRO package 2900 STOCK VH-250VS-SP NEW MANFORD VERTICAL/HORIZONTAL MILLING PACKAGE DEAL FOR $40,000 ALL INCLUDED:
MACHINE MODEL VH-250VS-SP WITH STANDARD EQUIPMENT. 5HP INVERTER MOTOR WITH DELTA 7.5 HP INVERTER, NST#40, X&Y AXIS SERVO MOTORS,Z AXIS LIFTING MOTOR.
INCLUDING: XY BALL SCREWS / SPINDLE TAPPING DEVICE / LEVELING SCREWS / COOLANT SYSTEM / ELECTRICAL BOX & SWIVEL PANEL / AUTO LUBRICATION / TOOLBOX & TOOLS / BASE SPLASH GUARD / MANUAL DRAWBAR / COLUMN SPLASH GUARD (L&R) / RUBBER CHIP COVER ON Y AXIS / 1"x20" #40 ARBOR WITH RUNNING BUSHINGS AND SPACERS. / VOLTAGE: 220/3/60
OPTIONAL ACCESSORIES ARE ALL INCLUDEDAIR POWER DRAWBAR, VERTICAL SPINDLE, NST#40 AIR POWER DRAWBAR, HORIZONTAL SPINDLE, NST#40 DIAL MICROMETER FOR QUILL STROKE LCD QUILL SCALE 12" x 58" TABLE, 51" SADDLE & X AXIS TRAVEL UL ELECTRICS. ELECTRIC BOX LOCKABLE SWITCH THAT CAN BE PADLOCKED ANDNOT ABLE TO OPEN DOOR WITH IT IN OFF POSITION.CABINET HAVE 110V TWIST-LOCK RECEPTACLE FOR DRO POWER.
LED WORK LIGHT, DIRECT WIRED TO ELECTRICAL BOXSAFETY GUARDING ON SPINDLE TABLE GUARDING NEWALL DP700 3-AXIS DRO, INSTALLED - Z AXIS ON KNEE
X AXIS TRAVEL 40". LOCK CONNECTION TO PLUG INTO ELECTRICAL CABINET.52 PIECE CLAMP KIT HOUR METER INCLUDED.
F.O.B.: Ontario, California OR New Jersey
Quill travel: 5-1/2” (140mm)Table to spindle nose (D): 5.1”- 22.8” (130-580mm)Over swivel on turret: NoneHead Swivel ( R& L ): 45ºHead tilt ( UP& DOWN ): OptionSpindle to column (F): 7.3”-27” (185-685mm)Spindle motor: 5HP, Inverter Motor (7.5HP Inverter Driver)Spindle taper: NST#40 Quill feed: 0.0013” - 0.0027” - 0.0055”Spindle Speed (r.p.m.): ( 60Hz) 50-3600
Horizontal Spindle speed (rpm) 48-240 (Lo), 240-1180(Hi)Taper NST#40Spindle center to column front surface: 15.7" (400mm)Spindle nose to table surface: 0.78" - 18.5" (20-470mm)Spindle center to Ram bottom surface: 6.7" (170mm)
XY axes motor (HP): 0.8 Kw Servo motorLifting motor: 1 HPCoolant pump: 1/6 HP
Overall height (A): 100.4” (2550mm)Overall depth (B): 84.6” (2150mm)Overall width (C): 77.55” (1970mm)Net Weight: 5500 lbs. (2500Kgs) TURRET MILLING MACHINES MODEL SPINDLE HEAD TABLE SIZE USD $37,800 SPINDLE SPEED MOTOR VH-250VS-SP NST#40 VARIABLE SPEED 5HP/3PH 12"X50"
STANDARD ACCESSORIES Tools & box/Leveling bolts & plates/Drawbar (manual)/Auto-lubrication/ Coolant system/ Quartz work light/ motor/Dial indicator Simple spindle tapping device/ XY ballscrew/Electrical box/ Lifting Motor Remark: 1. Horizontal spindle: 5HP/Hi-Low gear box (inverter variable speed) 2. Standard with variable speed spindle motor 5HP/220V with Inverter 7.5HP/220V OPTIONAL ACCESSORIES ( EXTRA COST) SPECIFICATION USD.$ Base splash guard 300 Column splash guard (left & right) 800 Airpower drawbar NST#40 800 Wooden crate packing 200 CE/CSA electric box extra 1000 12" x 58" Table 800 TRANSFORMER NEEDED IF OTHER THAN 220V 10 KVA 1200 Newall DP-700 3-axis DRO package 2900 STOCK VH-250VS-SP NEW MANFORD VERTICAL/HORIZONTAL MILLING PACKAGE DEAL FOR $40,000 ALL INCLUDED:
MACHINE MODEL VH-250VS-SP WITH STANDARD EQUIPMENT. 5HP INVERTER MOTOR WITH DELTA 7.5 HP INVERTER, NST#40, X&Y AXIS SERVO MOTORS,Z AXIS LIFTING MOTOR.
INCLUDING: XY BALL SCREWS / SPINDLE TAPPING DEVICE / LEVELING SCREWS / COOLANT SYSTEM / ELECTRICAL BOX & SWIVEL PANEL / AUTO LUBRICATION / TOOLBOX & TOOLS / BASE SPLASH GUARD / MANUAL DRAWBAR / COLUMN SPLASH GUARD (L&R) / RUBBER CHIP COVER ON Y AXIS / 1"x20" #40 ARBOR WITH RUNNING BUSHINGS AND SPACERS. / VOLTAGE: 220/3/60
OPTIONAL ACCESSORIES ARE ALL INCLUDEDAIR POWER DRAWBAR, VERTICAL SPINDLE, NST#40 AIR POWER DRAWBAR, HORIZONTAL SPINDLE, NST#40 DIAL MICROMETER FOR QUILL STROKE LCD QUILL SCALE 12" x 58" TABLE, 51" SADDLE & X AXIS TRAVEL UL ELECTRICS. ELECTRIC BOX LOCKABLE SWITCH THAT CAN BE PADLOCKED ANDNOT ABLE TO OPEN DOOR WITH IT IN OFF POSITION.CABINET HAVE 110V TWIST-LOCK RECEPTACLE FOR DRO POWER.
LED WORK LIGHT, DIRECT WIRED TO ELECTRICAL BOXSAFETY GUARDING ON SPINDLE TABLE GUARDING NEWALL DP700 3-AXIS DRO, INSTALLED - Z AXIS ON KNEE
X AXIS TRAVEL 40". LOCK CONNECTION TO PLUG INTO ELECTRICAL CABINET.52 PIECE CLAMP KIT HOUR METER INCLUDED.
F.O.B.: Ontario, California OR New Jersey
Consult an Expert
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Please call us +1.2017291100